Blog · Comparison

Ubtan vs Face Wash for Oily Skin: Which Should You Use?

By Khushveda Team · ·

For oily skin, a face wash wins on speed and on removing sunscreen and makeup. A clay-based ubtan wins if your skin feels stripped by foaming cleansers and you prefer a simpler, low-waste product with a matte, soft after-feel.

If your skin is oily, both a foaming face wash and a clay-based ubtan will leave it feeling cleaner — they just get there differently. A face wash dissolves oil with surfactants and rinses it away. An ubtan relies mostly on absorbent clay and fine powders to soak up oil and lift it off the surface. Neither is automatically better. The right choice depends on how your skin behaves after washing, how much time you have, and what else is in your routine.

Why does skin get oily in the first place?

Skin produces an oil called sebum to keep itself supple and to slow water loss. How much it produces is largely decided by genetics and hormones, and it varies with age, climate and season — most people are oilier in a humid Indian summer than in a dry winter.

This matters for one reason: no cleanser changes how much oil your skin makes. A cleanser can only remove what is already on the surface. Any product promising to control oil production with washing alone is overstating what washing can do.

How does a face wash clean oily skin?

A face wash is built around surfactants — molecules with one end that binds to oil and one that binds to water. Massaged over wet skin, they surround oil and dirt so that water can carry them away. This is efficient, quick and consistent, which is why face wash became the default.

The potential downside is over-cleansing. Strong surfactants do not distinguish well between excess oil and the lipids that help the outer layer of skin hold together. If your face feels tight or squeaky after washing, the cleanser has likely removed more than it needed to. Many modern face washes use milder surfactants for exactly this reason, so the category is broader than its reputation suggests.

How does ubtan clean oily skin?

A traditional ubtan for oily skin is clay-led. Multani mitti (fuller's earth) is highly absorbent: spread over damp skin, it takes up oil and holds it until it is rinsed off. Fine herbal powders in the mix add a mild physical polish that helps loosen dull surface cells.

Some ubtan ingredients also contribute a little natural cleansing action. Reetha and shikakai, for example, contain saponins — plant compounds that lather lightly in water. The result is a cleanse that leans on absorption and gentle friction more than on strong detergency.

The potential downsides are different from a face wash. Clay left to dry fully on the face can leave skin feeling tight. Coarse powders, or too much rubbing, can irritate. And herbal ingredients such as turmeric and sandalwood, while traditional, can cause reactions in some people.

Ubtan for oily skin vs face wash: how do they compare?

FeatureFace WashUbtan
How oil is removedSurfactants dissolve itClay absorbs it, with light natural lather from herbs
After-feelRanges from comfortable to tight, depending on the surfactantUsually matte and soft; tight if clay is left to dry
ExfoliationNone unless acids or beads are addedMild physical polish from fine powders
SpeedAbout thirty secondsBar: about a minute; powder: several minutes including mixing
Removing sunscreen and makeupGenerally effectiveNot designed for it; an oil or balm cleanse first works better
PackagingUsually a plastic tube or bottleTypically paper or card
Ingredient listOften long, with preservatives needed for a water-based formulaUsually short, because a dry bar needs less preserving

When does a face wash make more sense?

  • You wear water-resistant sunscreen or makeup daily and want one product that removes it reliably.
  • A dermatologist has prescribed a medicated cleanser, or you use a face wash with an active ingredient such as salicylic acid for breakouts. Keep using it — a cosmetic bar is not a substitute for treatment.
  • Your skin reacts to botanical ingredients or fragrance, and a simple fragrance-free gel suits you.

When does ubtan make more sense?

  • Your current face wash leaves your skin tight, and you would like to try a cleanser that leans on clay instead of strong foaming agents.
  • You like a slightly matte finish and the light polish that fine powders give.
  • You want a shorter ingredient list and less plastic in the bathroom.
  • You enjoy the ritual — for many people, the smell of sandalwood and rose is half the reason.

Can you use both?

Yes, and many people do. A common pattern for oily skin is a face wash in the evening, when there is sunscreen, sweat and pollution to remove, and an ubtan bar in the morning, when the skin only needs a light cleanse. Another is ubtan on most days and a face wash after workouts or heavy makeup. There is no rule that a routine must be all one or all the other.

How do you switch from face wash to ubtan?

  • Patch test the bar on your inner wrist or behind the ear and wait 24 hours.
  • Start with once a day, at the wash where your skin is least loaded — usually the morning.
  • Massage gently for up to a minute and rinse before the clay dries on your skin.
  • Give it two to three weeks before judging. Skin often feels different in the first few days of any new cleanser.
  • If you notice redness, stinging or new irritation, stop and return to what worked before.

What to expect when you switch

  1. Lather is lighter and lower-foam than a face wash.
  2. Scent is earthy and herbal; there is no added fragrance.
  3. Rinse while the clay is still damp — do not let it dry fully on your face.
  4. Patch test first; stop use if your skin reddens or stings.

Does washing more often reduce oiliness?

No. Washing removes the oil that is on the surface; it does not slow the glands that make it. Washing more than twice a day — with either product — tends to leave skin dry and uncomfortable without making it less oily a few hours later. Twice a day, plus after heavy sweating, is enough for most people. A light, non-greasy moisturiser afterwards is still worth using: oily skin can be dehydrated too.

The verdict

For oily skin, a face wash wins on speed and on removing sunscreen and makeup. A clay-based ubtan wins if your skin feels stripped by foaming cleansers and you prefer a simpler, low-waste product with a matte, soft after-feel. Plenty of people get the best result from using each where it is strongest. Whichever you choose, treat it as a cleanser — not a cure — and see a dermatologist for persistent acne or irritation.

If you would like to try the ubtan side of the comparison, the Khushveda Face Glow Ubtan is a multani mitti bar with haldi, chandan and rose petal powder, made for daily face cleansing. For more on what goes into an ubtan, see the guide to what ubtan is and the ingredients glossary.

Key takeaways

  • No cleanser changes how much oil your skin produces — it can only remove what is already on the surface.
  • Face wash uses surfactants to dissolve oil; ubtan relies on absorbent clay and fine powders to soak it up.
  • Face wash wins on speed and on removing sunscreen and makeup; ubtan wins if foaming cleansers leave your skin feeling tight or stripped.
  • Clay left to dry fully on the face can leave skin feeling tight — rinse before it dries completely.
  • Many people use both: a face wash in the evening and an ubtan bar in the morning.
  • Washing more than twice a day does not reduce oiliness, and oily skin can still benefit from a light moisturiser.

This article is general information about cosmetic products, not medical advice. For any persistent skin or scalp concern, please consult a dermatologist.